Regulators and Filters
Zero Pressure regulators are intended to allow the gas pressure to be controlled in proportion to the combustion air pressure. By applying, or backloading the diaphragm with an air feed from the combustion air system it is possible to ensure the burner always runs at a constant air/gas ratio, whatever the conditions. By modifying the impulse pressure by allowing some air to escape it is possible to set any air/gas ratio required.
Zero Pressure Regulators |
||
|
Due to the nature of this device, we reccommend you request the full data sheet for this product when designing new systems. |
Max inlet pressure - 500 mbar Outlet pressure range -10 to +300 mbar |
507 3/4" BSP |
||
510 1" BSP |
||
515 1 1/2" BSP |
||
| 520 2" BSP Part 53-01-48 |
||
| 5065 DN65 Flange Part 53-01-49 |
||
| 5080 DN80 Flange Part 53-01-50 |
||
| 5100 DN100 Flange Part 53-01-51 |
||
| We can supply the full Dungs range of gas controls. Solenoid valves, Multiblocks, Regulators, Pressure Switches, Filters - in fact, practically everything to do with controlling gas ! | ||
Gas Filters.A range of filter modules intended to protect down stream gas controls from damage caused by particulate contamination. They are also a major benefit in the firing of glazed and other products where contamination is unacceptable. |
||
 |
Gas filter. |
Max pressure - 2 bar We can supply units from our 6 bar range - contact our sales team. |
| 1/2" BSP Part 53-01-52 |
||
3/4" BSP |
. | |
1" BSP |
||
1 1/4" BSP |
||
1 1/2" BSP |
||
| 2" BSP Part 53-01-57 |
||
| DN65 Flange Part 53-01-58 |
||
| DN80 Flange Part 53-01-59 |
||
| DN100 Flange Part 53-01-60 |
||
| Follow link for main Pressure Regulator page. | ||
| We can supply the full Dungs range of regulators. | ||
| For Pipe, Fittings and hand valves, see the Hardware section | ||
